888-388-7808

Solder Test/Process Evaluation PCB Boards and Kits


PC2009 Rev B AIM Solder Print Test Board and Kit

PC2009 Rev B AIM Solder Print Test Board and Kit
The AIM Rev B print test board was designed to include many printing challenges which are commonly encountered on manufacturers assemblies. This updated iteration adds several new components.

SMTA Solder Paste Test Vehicle for Miniaturized Surface Mount Technology

SMTA Solder Paste Test Vehicle for Miniaturized Surface Mount Technology
SMTA Solder Paste Test Vehicle for Miniaturized Surface Mount Technology

PC051 Foresite Umpire Test Board

PC051 Foresite Umpire Test Board
This vehicle is best used to look at process qualifications for the primary and secondary steps. Wave Solder, SMT, Cleaning, and then the secondary steps of temporary solder mask, rework flux, and rework cleaning. It also works well to look at interactions of solder mask with fluxes and/or solder pa...

PCB310 PACTECH Flip Chip Test and Evaluation Kit and Board

PCB310 PACTECH Flip Chip Test and Evaluation Kit and Board
The PACTECH Flip Chip Test & Evaluation board is for placement and daisy chain continuity testing after assembly. Substrate has 14 mounting sites for 10 x 10mm Flip Chips.

FA10 Laminate Board

FA10 Laminate Board
FA10 laminate test board for the 10mil pitch flip chip. Board finish is Organic Solderability Preservative (OSP).


PB08 Laminate Board

PB08 Laminate Board
PB08 test board for process evaluation and qualification of the PB-08 2x2 flip chip component.

PCB368-8mm .3mm Fine Pitch CVBGA Qualification, Evaluation and Test Kit

PCB368-8mm .3mm Fine Pitch CVBGA Qualification, Evaluation and Test Kit
The Practical Components PCB368-8mm Evaluation Board is a test vehicle for the .3mm fine pitch CVBGA component.

PC250 TMV® (Through Mold Via) 14mm Board and Kit - Drop Test Lead Free Kit

PC250 TMV® (Through Mold Via) 14mm Board and Kit - Drop Test Lead Free Kit
Practical Components new TMV® 14MM test board and kit is a basic drop test board designed for the Amkor TMV® (Through Mold Via) components.

PCB200 PoP (Package on Package) 12mm Board and Kit - Lead-Free Test Kit

PCB200 PoP (Package on Package) 12mm Board and Kit - Lead-Free Test Kit
This PoP 12mm Board and Kit is designed as test vehicle for the new Amkor (PSvfBGA) 12x12 305 PoP package. PoP packages from Amkor focus on high density logic devices.


PCB200 PoP (Package on Package) 14mm Board and Kit - Lead-Free Test Kit

PCB200 PoP (Package on Package) 14mm Board and Kit - Lead-Free Test Kit
This PoP 12mm Board and Kit is designed as test vehicle for the Amkor (PSvfBGA) 14x14 305 PoP package. PoP packages from Amkor focus on high density logic devices.

Kit Identifier. A handy guide to all of our kits.

Kit Identifier. A handy guide to all of our kits.
Practical Components has developed a full range of machine run PCB boards used for setup, evaluation, assembly workflow evaluation, soldering programing, profiling, practice and certification, soldering rework training, prototyping, capability demonstrations, testing, CPK studies and more.

Conformal Coating Process Flow Chart

Conformal Coating Process Flow Chart
Practical Components provides products and services for the testing and evaluation of Conformal Coating materials on assembled PCB test boards.

Test Boards for Cleanliness and Conformal Coating

Test Boards for Cleanliness and Conformal Coating
The Practical Components B-52 CRET (Cleanliness & Residue Evaluation Test) board is designed to help determine the ionic cleanliness of a customers manufacturing process. Solder practice test vehicle PCB boards and kits are used for machine setup, evaluation, qualification, workflow analysis, proto...

PCB-SIR Test Board and Kit

PCB-SIR Test Board and Kit
The Practical SIR board is double sided board to characterize fluxes by determining the degradation of electrical insulation resistance of rigid printed wiring board specimens after exposure to the specified flux. This test is carried out at height humidity and heat conditions. The board contains pa...

SMTA Saber Evaluation Board and Kit

SMTA Saber Evaluation Board and Kit
Tin-Lead or Lead-Free Available! The SMTA Saber Evaluation Kit. Practical Components is licensed by SMTA to distribute the Saber Evaluation PC Board. The Saber Board includes land patterns for a wide variety of JEDEC and EIAJ components.

B-52 CRET Cleanliness & Residue Evaluation Test Kits

B-52 CRET Cleanliness & Residue Evaluation Test Kits
The New Practical Components B-52 CRET (Cleanliness & Residue Evaluation Test) Kit is designed to help determine the ionic cleanliness of a customers manufacturing process. The test boards and components follow guidelines associated with the IPC-B-52 Test Vehicle.


B-52 CRET Rev B CRET Cleanliness & Residue Evaluation Kit

B-52 CRET Rev B CRET Cleanliness & Residue Evaluation Kit
B-52 CRET Rev B Cleanliness and Residue Evaluation Test Kit is the newest revision of the existing B-52 CRET board.

PCB000 Lead-Free Zero-Ohm SMD Resistor Kit

PCB000 Lead-Free Zero-Ohm SMD Resistor Kit
The PCB000 test board has land patterns for 01005, 0201, 0402, and 0603 Zero Ohm Lead-Free SMD Resistors. Each component pad is connected in series (daisy-chained) to the next pad.

PC2009 Rev A AIM Solder Print Test Board and Kit

PC2009 Rev A AIM Solder Print Test Board and Kit
The AIM print test board was designed to include many printing challenges which are commonly encountered on manufacturers assemblies. BGA pads have circular and square pad design to test paste release. AIM has included the standard IPC slump test pattern in order to further challenge the properties ...

PCB005 BGA Variable Pitch and Array Board

PCB005 BGA Variable Pitch and Array Board
Practical Components is now offering a “one-of-a-kind” BGA Variable Pitch and Array PC Board. Each board contains matrices for the most popular ball pitches found on BGAs and CSPs.

PC007 MLF® Test Board and Kits

PC007 MLF® Test Board and Kits
This PCB007 MicroLeadFrame® (MLF®) Test Board is two test boards in one. The top side of the board consists of daisy-chained MLF® pads. Amkor’s new MLF® packages are a near CSP plastic encapsulated

PC008 Solder Practice Board and Kits

PC008 Solder Practice Board and Kits
Rework practice, solder training and evaluation, and for testing and calibration of pick-and-place machines.

PC009 Mixed Technology Board and Kit

PC009 Mixed Technology Board and Kit
The PC009 Mixed Technology kit has surface mount components and through-hole components. This kit’s primary use is for hand soldering but is also available as machine run upon special request.

PC011 BGA Fine Pitch Board and kit

PC011 BGA Fine Pitch Board and kit
The PC011 BGA Kit contains Amkor daisy-chained fine pitch BGAs. The daisy-chain PCB011 test board contains patterns for the 0.4mm pitch, 0.5mm pitch and 1.0mm pitch CSP/BGA components.

PC012 BGA Global Daisy-Chain Test Kit

PC012 BGA Global Daisy-Chain Test Kit
The New PCB012 Global Daisy-Chain test board has 25 different BGA land patterns. Board pads accommodate BGA components ranging from 15mm square to 35mm square.

PC014 IPC 9850 Attribute Defect Rate Kit

PC014 IPC 9850 Attribute Defect Rate Kit
IPC-9850 includes test methods for determining various SMT placement equipment attributes, including repeatability, accuracy and attribute defects.

PC031 Cookson Lead-Free Process Capability Validation Kit

PC031 Cookson Lead-Free Process Capability Validation Kit
Practical Components and Cookson Electronics are teaming up to offer a new Lead-Free Process Capability Validation Program. This program consists of lead-free components and test boards from Practical Components

Jabil Solder Paste Evaluation Board and Kit

Jabil Solder Paste Evaluation Board and Kit
Practical Components has worked with Jabil to develop a new Solder Paste evaluation and qualification board and kit. The Jabil Solder Paste Evaluation These kits were designed primarily for solder paste evaluations but can be used for a wide variety of requirements as well as for development of new...

PC049 SMT|PTH - Mixed Technology Pb-Free Kit

PC049 SMT|PTH - Mixed Technology Pb-Free Kit
Indium Corporation SMT/PTH Mixed Technology Pb-Free Kit Practical Components and Indium Corporation are introducing a new Lead-Free SMT/Through-hole Mixed Technology test board and kit. The PCB049 Board can be used to evaluate the following conditions:

PCB300 FusionQuad® 216ld (100 | 116) Board and Kit - Drop Test lead Free Kit

PCB300 FusionQuad® 216ld (100 | 116) Board and Kit - Drop Test lead Free Kit
The new FusionQuad® 216 ld (100/116) drop test evaluation kit contains both the test board and Amkor FusionQuad® 216 components.

PCB300 FusionQuad® 176(128|48) Board and Kit - Thermal Cycle Lead Free Kit

PCB300 FusionQuad® 176(128|48) Board and Kit - Thermal Cycle Lead Free Kit
Thermal Cycling test PCB board and kit for Amkor’s FusionQuad® components. Thermal Cycling is a diagnostic test for electronic assemblies. The test is severe on solder joints that are under both compressive and tensile strain during cycling as a result of differential thermal expansion.

PCB200-15mm-TC (Package on Package) 15mm Board and Kit - Thermal Cycle Lead Free Kit

PCB200-15mm-TC (Package on Package) 15mm Board and Kit - Thermal Cycle Lead Free Kit
The 15mm Package on Package (PoP) Thermal Cycling Test Board is designed for use with Amkor’s new 15mm PoP components. Both top and Bottom components can be mounted on the board and connected with a daisy chain pattern to the test board.

PC009-40 Aegis Traceability & Control Validation Kit

PC009-40 Aegis Traceability & Control Validation Kit
Practical Components and Aegis Industrial Software, the leader in Manufacturing?Information Management Systems, have partnered together to offer a traceability and control kit designed to validate your entire manufacturing process and provide the potential for rich product and process traceability d...


IPC Validation Services

New Product

.4mm Pitch eWLP Dummy Wafer-Amkor
.4mm Pitch eWLP Dummy Wafer-Amkor

Walts

Technical Center

In the News

Practical Components to Exhibit at the IPC High Reliability Forum
Practical is announcing that it will display its latest technology at the upcoming IPC High Reliability Forum and exhibition scheduled to take place May 15-17, 2018 in ... [read more]

Request Catalog

Catalog

Request or download our catalog and sign-up for our newsletter.

Continue